Servokon Systems Ltd
Bulandshahr Road Industrial Area, New Delhi, Delhi
GST No. 07AABCS2570D1ZO
TrustSEAL Verified
Call 0804607762572% Response Rate
SEND EMAIL
Product Details:
| Automatic Grade | Automatic |
| Phase | Three Phase |
| Input Voltage | 160V - 260V |
| Type | Automatic |
| Output Voltage | 220 V |
| Cooling Type | Air Cooled, Oil cooled |
| Response Time | 10 m. sec |
| Range | 1 KVA to 100 KVA, 3 KVA to 300 KVA |
| Output Waveform | True to Input |
| Input Frequency | 45 - 55 Hz |
| Correction Speed | 10 - 65 V/Sec |
| Operating Speed | -15C to 50 Degree C |
| No Load Loss | Less than 1% |
| Operation | Auto / Manual |
Owing to our expertise in the domain, we have been able to offer Digital Air Cooled Servo Stabilizers. These servo stabilizers are suitable to be used in single & three phase up to 300 Kva. We make use of latest technologies to manufacture these stabilizers that comply with the international quality standards. Some of the features of these products are better performance, efficiency and durability.
Applications:
Other Details:
| Compatibility with DG Set | Specially Designed Control Card for faithful operation on Mains as well as DG Set |
| Suitability | Suitable for 3 phase Unbalanced/Balanced Supply, Unbalanced / Balanced Loads |
| Optional Features (at Extra Cost) | High & Low Voltage Cutoff System Over Load And Short Circuit Protection Single Phase Prevention System Phase Sequence change protection Change over switch to By-Pass the system Earth Fault Protection Surge & RS Suppression System 110 Volts Output for Special Equipment. |
Product Details:
| Phase | Three Phase |
| Input Voltage | 160 - 270 V, 270 - 460 V three Phase |
| Frequency (hertz) | 45 - 55 Hz |
| Efficiency | Better Than 98% |
| Operating Temperature | -15 C to 50 DegreeC |
| Response Time | 10 m. sec |
| Output Waveform | True to Input |
| Correction Speed | 10 - 65 V/Sec |
| Correction Methods | Step less Correction Using Variac |
| Cooling | Natural Air / Oil |
| Duty Cycle | 100 % |
| No Load Loss | Less than 1% |
Owing to our expertise in the domain, we have been able to offer Servokon Air Cooled Voltage Stabilizer. These servo stabilizers are suitable to be used in single & three phase up to 300 Kva. We make use of latest technologies to manufacture these stabilizers that comply with the international quality standards. Some of the features of these products are better performance, efficiency and durability.
Applications:
Other Details:
| Compatibility with DG Set | Specially Designed Control Card for faithful operation on Mains as well as DG Set |
| Suitability | Suitable for 3 phase Unbalanced/Balanced Supply, Unbalanced / Balanced Loads |
| Optional Features (at Extra Cost) | High & Low Voltage Cutoff System Over Load And Short Circuit Protection Single Phase Prevention System Phase Sequence change protection Change over switch to By-Pass the system Earth Fault Protection Surge & RS Suppression System 110 Volts Output for Special Equipment. |
Product Details:
| Input Voltage | 230 V |
| Brand | Servokon |
| Efficiency | 98 % |
| Output Accuracy | +/- 1% |
Additional Information:
Product Details:
| Input Voltage | 360 - 460 V |
| Output Voltage | 400/415 V |
| Range | Up to 5000 KVA |
| Cooling Method | Naturally Air Cooled |
| Correcting Speed | 10 - 15 v/sec |
| Duty Cycle | 100 % |
| Operating Temperature | 45 Degree C |
| Mounting | Uni Directional Wheels |
Offered by us are high-quality Rolling Contact Type Voltage Controllers that are extensively used in various industrial applications. These are used for units that are used for units with either L.T. supply or H.T. supply. Our voltage controllers can be installed in both indoor and outdoor sites. These are used for the production of a steady output voltage instead of fluctuations of the input voltage.
Advantages:
Applications:
Fluctuation Levels:
Input Voltage Variation | % Reduction in Breakdown Possible | Approx. Power Saving Possible | ||
Motor Load Below 30 HP. | Lighting Load | Motor Load Below 30 HP. | Lighting Load | |
380-400 volts | Nil | Nil | Nil | Nil & Servo Stabilizer Required |
380-420 volts | 5% | 10% | 3% | 5% |
380-440 volts | 10% | 20% | 5% | 10% |
360-460 volts | 40% | 40% | 7% | 20% |
360-480 volts | 60% | 60% | 10% | 30% |
320-500 volts | 80% | 80% | 15% | 37% |
Product Details:
| Output Voltage | 380 / 400 / 415 V |
| Input Voltage | 270 V - 460 V |
| Material | 99.9% pure copper |
| Rating | Up to 3000 KVA |
| Output Waveform | True to Input |
| Input Frequency | 45 - 55 Hz |
| Correction Method | Step less Correction Using Variac |
| No Load Loss | Less than 0.5% |
We are a reputed firm engaged in offering Variac Type Digital Servo Stabilizer. The use of these stabilizers ensures easy prevention from a malfunction in equipment. These systems are installed with latest digital microprocessors controllers for the constant output voltage. The Output voltage stability of these stabilizers allows the optimum drawing of the current without high consumption of power.
Features:
| Compatibility with DG Set | Specially Designed Control Card for faithful operation on Mains as well as DG Set |
| Suitability | Suitable for 3 phase Unbalanced/Balanced Supply, UNbalanced / Balanced Loads |
| Additional Features (at Extra Cost) | High & Low Voltage Cutoff System Over Load And Short Circuit Protection Single Phase Prevention System Phase Sequence change protection Change over switch to By-Pass the system Earth Fault Protection Surge & RS Suppression System 110 Volts Output for Special Equipment. |
Applications: