SERVOKON make, 300 KVA, THREE PHASE DIGITAL MICROCONTROLLED SERVO STABILIZER Capacity 300 KVA Make SERVOKON Input Voltage 340-460 volts (Phase to Phase) 200-270 volts (Phase to Neutral) Output Voltage 400 volts ± 1% (Phase to Phase) 230 volts ± 1% (Phase to Neutral) Type Suitable for: 100% BALANCED/UNBALANCED LOAD 100% BALANCED/UNBALANCED SUPPLY Application Indoor Type Standard IS 2026 & IS 9815 Phase 3-Ph, 4 Wires Frequency 50 Hz Wave form Distortion Nil(Negligible) Response Time Instantaneous (mili sec) Speed of Correction 20 to 30 V/sec (as required) Mode of Operation Automatic Suitability Suitable for all Power Factors. Duty Cycle Continuous 24 Hrs. Efficiency As per IS Standards Losses at No Load As per IS Standards Losses at Full Load As per IS Standards Temperature Rise 45°C Above Ambient Laminations Used Imported Low Losses CRGO Laminations - M4 Grade. Carbon Brushes Used Imported High Grade Graphite. Class of Insulation Class - A , Greater Than 6M ohms Break Down Strength 1500 volt AC for 1 minutes (for whole unit)